Thanks to the collaboration with the Nexmon project and an upgrade to the Linux 6.12 kernel, users can now perform Wi-Fi assessments without relying on external USB adapters.
This development not only streamlines hardware requirements for field penetration tests but also broadens device compatibility to include the latest Raspberry Pi 5 models.
For years, Raspberry Pi’s built-in Wi-Fi chipset—based on Broadcom/Cypress silicon—lacked official support for monitor mode and injection out of the box.
Security professionals were forced to attach third-party USB wireless adapters whenever packet capture or rogue-access-point testing was needed.
While the open-source Nexmon project had long provided firmware patches to overcome these limitations, integrating those patches into a stable distribution proved challenging.
Kali Linux remained on the 5.15 kernel series for an extended period due to packaging complexities. Attempts to leap to kernel 6.6 were stalled by stability issues unrelated to Nexmon itself, delaying official support for newer boards such as the Raspberry Pi 5.
With the transition to Linux kernel 6.12, the Kali team revisited and formalized Nexmon integration through two Debian packages.
The first, brcmfmac-nexmon-dkms, provides a DKMS-enabled version of the brcmfmac driver that recompiles against the host kernel on installation, ensuring ongoing compatibility with future updates.
The second package, firmware-nexmon, delivers patched firmware binaries for supported Broadcom chips.
Together, these packages allow Raspberry Pi models—from the Zero W series through the Pi 5—to enter monitor mode and execute injection directly via the onboard radio.
Getting started is straightforward on any Kali ARM image.
After updating the package lists, users install the Nexmon components and reboot:
bashsudo apt update
sudo apt full-upgrade -y
sudo apt install -y brcmfmac-nexmon-dkms firmware-nexmon
sudo reboot
Post-reboot, verify the patched driver is active:
bashmodinfo brcmfmac | grep filename
To activate monitor mode, run:
bashairmon-ng start wlan0
Despite occasional “Unknown error 524” messages, the interface typically transitions to wlan0mon, as confirmed by:
bashiw dev
Frame injection can then be tested with:
bashsudo aireplay-ng --test wlan0mon
A successful run reports “Injection is working!”, though actual performance may vary by board revision.
This enhancement simplifies the hardware footprint for wireless assessments and empowers professionals to deploy a fully capable Kali Linux environment on the smallest Raspberry Pi platforms.
By removing the dependency on external adapters, teams can conduct discrete, lightweight security audits with minimal gear.
Looking ahead, the Kali team plans further refinements in the ARM ecosystem, leveraging community feedback to expand support for additional devices and streamline the installation process even further.
Find this Story Interesting! Follow us on LinkedIn and X to Get More Instant Updates.
The post Kali Linux Launches Two New Packages for Improved Wi-Fi on Raspberry Pi appeared first on Cyber Security News.
The malicious npm package js-logger-pack (versions up to 1.1.27) has evolved, turning Hugging Face into…
The malicious npm package js-logger-pack (versions up to 1.1.27) has evolved, turning Hugging Face into…
The malicious npm package js-logger-pack (versions up to 1.1.27) has evolved, turning Hugging Face into…
Tension: Being indispensable at work doesn’t guarantee meaningful connections outside of it. Noise: We mistake…
Editor’s note: This article was originally written by Justin Brown and has been updated in…
DC Universe chief James Gunn has confirmed that upcoming movie Clayface, which just received its…
This website uses cookies.